0

Tervetuloa

Lisää kuvia

van den Hul DIY SPADE

Only 8 left

40,00 €
EAN: 871805800435
Tuotekoodi: DIYSPADE

Esittely

4 kpl setti vdHul haarukkaliittimiä kaiutinkaapeliliitoksiin
TAI

Lisätiedot

Kuvaus

DIY SCREW-ON SPEAKER CONNECTORS 

Versatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away.

 

  • 24 carat gold plated, screw-on, solderless connectors 
  • Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification 
  • Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter   
  • The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance. 
  • The high pressure clamping ensures low loss electrical connection and maximum signal transfer 
  • Banana terminal (standard Ø4 mm pin) 
  • Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm. 
  • Easy assembly instructions (4 steps): 
  1. Strip off 14mm of the multi-strand cable/wire jacket
  2. Insert the stripped end through the screw-on collar
  3. Fan out the strands and evenly fold them encircling the collar
  4. Insert the banana pin/spade blade and screw-on to the collar

 

  • These connectors fit the following cables and wires:

 

The CLEARTRACK

CS - 12 HF

The CLEARWATER

CS - 14 HYBRID

D – 352 HYBRID

CS – 14

The GOLDWATER

CS – 16

The INSPIRATION HYBRID

CS - 122 HYBRID

The SKYLINE HYBRID

SCS - 16

The SNOWLINE

SCS - 18

The TEATRACK HYBRID

 

The TWIN

 

The WIND Mk II HYBRID

 

TIP:

Try our special contact fluid The SOLUTION on the strands before mounting the banana pin/spade blade part.

Valmistaja van den Hul, Hollanti
Takuuaika kk 24
Nettopaino 0.05
Ostoskori

Ostoskori on tyhjä.